134 Series Electric Actuator Cylinder: 8-Ton Thrust at 50 mm/s, Built for Demanding Press Applications
When a hydraulic press is too messy, too inefficient, and too hard to control, an electric actuator cylinder is the answer. Our 134 series electric cylinder actuator is a heavy-duty linear drive unit that delivers a maximum thrust of 8 tons (80 kN) at a rated speed of 50 mm/s, with fully customizable speed-and-thrust combinations to match each customer’s process. As demonstrated in our latest product video, the 134 series is already running stably on our customers’ pressure equipment, proving itself in real production environments.
Figure 1. The 134 series heavy-duty electric actuator cylinder family.
What Is the 134 Series Electric Cylinder Actuator?
The 134 series is a high-force electric cylinder actuator designed to replace hydraulic and pneumatic cylinders in industrial pressing, clamping, and forming applications. Inside the rigid 134 mm-class housing, a high-torque linear servo motor drives a precision-ground ball screw, converting rotary motion into clean, accurately controllable linear thrust. There is no hydraulic oil, no air supply, no leakage, and almost no routine maintenance — only quiet, repeatable, energy-efficient motion.
Key Performance: 8 T Thrust, 50 mm/s, and Customizable Speed–Thrust Options
The headline figures of the 134 series speak for themselves: a maximum thrust of 8 tons and a rated speed of 50 mm/s. More importantly, the series is built around customization. Because thrust and speed are linked through motor torque, screw lead, and reduction ratio, we offer a range of speed options — and each speed corresponds to a different available thrust. Need higher force for a deep press-fit? We configure a lower-speed, higher-thrust version. Need faster cycles for a light-load application? We tune the drive toward speed. Every 134 series unit is engineered to order, so customers receive an electric actuator cylinder that fits their machine instead of forcing their machine to fit the cylinder.
Typical customization items include stroke length, mounting style (front flange, rear clevis, trunnion, foot mount), rod-end thread, feedback resolution, and protection class, allowing the cylinder to be integrated into both new equipment and retrofit projects with minimal redesign.
Figure 2. 8-ton thrust electric cylinder actuator for press applications.
Linear Servo Motor Precision Inside
At the heart of the 134 series is a linear servo motor drive train with closed-loop feedback. Compared with conventional electric servo actuators that only run simple extend-retract cycles, our solution controls position, speed, and thrust simultaneously across the entire stroke. Press depth can be programmed to a fraction of a millimeter, pressing force can be held constant or profiled, and every cycle is digitally recorded for traceability. The precision ball screw and high-rigidity thrust bearings ensure that the full 8-ton output is transmitted with minimal backlash and a long service life, even under continuous duty.
Technical Highlights at a Glance
Series: 134 series heavy-duty electric actuator cylinder. Maximum thrust: 8 tons (80 kN). Rated speed: 50 mm/s, with customized speed options available — different speeds correspond to different rated thrusts. Drive: linear servo motor with precision ball screw and closed-loop feedback. Control: matched display-control PLC all-in-one machine with color touch screen. Communication: multiple modes including RS485/Modbus RTU, Ethernet, and CAN. Typical applications: servo presses, press-fitting, riveting, stamping, clamping, and other pressure equipment. Customization: stroke, mounting, rod end, feedback, protection class, and thrust-speed curve.
A Complete Solution with Our Display-Control PLC All-in-One
A great cylinder deserves a great controller. Each 134 series electric actuator cylinder can be supplied as a complete, ready-to-run package together with our self-developed display-control PLC all-in-one machine. This compact unit combines a color touch-screen HMI and a powerful PLC in a single housing, giving customers outstanding cost performance: one device replaces a separate HMI, PLC, and intermediate relays, cutting panel space, wiring labor, and total system cost.
Functionally, the all-in-one controller is remarkably complete. Operators can set press position, speed, and force directly on the touch screen, store multi-recipe programs, monitor real-time thrust and position curves, and read alarm histories at a glance. Multiple communication modes are supported — including RS485/Modbus RTU, Ethernet/Modbus TCP, and CAN — so the system connects easily to a customer’s host PLC, MES, or data-acquisition system, and remote parameterization and diagnostics are straightforward. For overseas customers, this “cylinder + controller + software” one-stop package dramatically shortens commissioning time: mount, wire, power on, and press.
Figure 4. Display-control PLC all-in-one machine with color touch screen.
Why More Manufacturers Are Switching to Electric Servo Actuators
Across the press and assembly industry, electric servo actuators are steadily replacing hydraulic cylinders. The reasons are practical. An electric solution consumes energy only when it moves, while a hydraulic power unit burns energy around the clock; there is no oil to leak, filter, or dispose of, which keeps both the product and the workshop clean; and because every motion is closed-loop controlled, quality data from each press cycle can be stored and traced. The 134 series brings all of these advantages into the 8-ton force class that was once the exclusive territory of hydraulics — at a purchase and operating cost that makes the decision easy.
Figure 5. Electric servo actuators powering modern press equipment lines.
Proven on Customers’ Pressure Equipment
The 134 series was developed for exactly the kind of application shown in the video: servo presses and pressure equipment. Typical uses include bearing and bushing press-fitting, motor rotor and shaft assembly, riveting, stamping, powder compacting, and force-displacement-monitored testing. In these processes, the ability to program a precise force-position envelope — and to judge every pressed part as OK or NG in real time — raises yield and eliminates the guesswork of hydraulic pressing. Customers who switched from hydraulic cylinders to our 8-ton electric cylinder actuator report cleaner workshops, lower energy bills, faster changeovers, and far less downtime.
Figure 6. The electric cylinder actuator integrated into a customer’s servo press.
R&D and Manufacturing Strength Behind Every Unit
As a specialized manufacturer of electric servo actuators, we control the entire chain from R&D to final testing. Our engineering team handles structural design, servo matching, screw selection, and control software in-house, which is why non-standard strokes, special thrust-speed curves, and customer-specific communication protocols can be delivered quickly. On the manufacturing side, precision machining centers, automated assembly lines, and 100% factory testing — including full-load thrust verification, repeatability measurement, and extended endurance runs — guarantee that every 134 series cylinder leaving our plant meets the same high standard. High quality and high stability are not slogans for us; they are the reasons our customers reorder.
Trusted by Customers Worldwide
Over the years, we have established in-depth cooperation with many overseas customers across Europe, the Americas, the Middle East, and Southeast Asia. These partners rely on us not only for standard electric cylinder actuator products, but also for joint development of application-specific solutions — from single press stations to fully automated assembly lines. Stable product quality, responsive English-language technical support, and reliable delivery have turned first-time buyers into long-term partners.
The 134 series electric actuator cylinder combines 8-ton thrust, 50 mm/s speed, fully customizable speed-thrust configurations, linear servo motor precision, and a cost-effective display-control PLC all-in-one package. Whether you are building new pressure equipment or upgrading a hydraulic press line, our team is ready to configure the right electric servo actuators for your application. Contact us today with your thrust, speed, and stroke requirements — and let our engineers turn them into a stable, high-quality motion solution.
Оставить комментарий